Designing is something that brings life and authenticity to any building either it is residential or commercial. As every client has unique needs associated with their construction and architectural projects. We must thank to all the latest technologies due to which, the experienced and professional design team of SSA Architecture, Small Studio Associates enables you to receive our service, value, and innovation all at once.   It cannot be denied that every project presents a diverse set of challenges and opportunities. For this reason, we offer you a wide range of services.  Building Design Tenant Improvement Design Construction Documents Zoning Approval Process Planning ADA Survey Models & Renderings Use Permit Processing   There is no doubt that a building is an expression of energy, design, and materials. Basically, buildings are not comprised of single components, but rather, they are each comprised of systems that interact with one another, including the larger ecological systems and the human community.Apart from the above-listed designing services, there are numerous other services that enhance occupants, comfort, and productivity such as cabinet design, code consulting, conceptual design, construction administration/ document/ management/ observation/ cost estimating, day lighting design, and much more.   A good start leads to good results and proper listening helps you to deliver the exact masterpiece that the client is asking for. As one of the leading Architectural Firms of Las Vegas, we believe in offering strategic architectural design goals within real-world project constraints.   Small Studios Associates adhere to our client’s budget and scheduling parameters. Moreover, our experienced designers provide buildable solutions that create functional spaces within enriched aesthetic environments.   For more information, Check out our services page.

SSA Architecture is experienced in drawing new commercial building “blueprints” as most other architects in Las Vegas are. With that experience we have found there are some steps that make the “Drafting Plans” process smoother. These are a few things that you should look into doing to expedite the design and construction documents process.   Preliminary Design – Allow us, the architect, to do a preliminary design with key features that you plan on incorporating into the rough preliminary design concept. This allows for the architect to investigate if your design is viable for the land you are planning to use. This lets you get a feel for the size of the building and parking lot that your new project will demand. This is best done prior to purchasing the land, so that you can try a few different designs on different properties. You can find more information on this specific topic on YouTube. https://www.youtube.com/watch?v=2evbLedpyww   Due Diligence Planning Review – The preliminary design can be taken to the planning department so that we can get their feedback on the specifics of the project. Every jurisdiction is different, but most will initially tell you that as long as your land’s zoning is correct then the design and use are approvable. However, this is frequently not the case and it is best to get them involved early in the process to sort out planning and zoning feedback specific to your exact site and requirements as early soon as possible. If it is worse than that, and they don’t accept your land as viable. It is better to find out sooner rather than later, so that you may plan around having to switch pieces of land or design concepts. If you want to discuss having SSA Architecture provide a preliminary site concept or planning and zoning assistance please schedule a free consultation at 702-873-1718 or contact us here.   Entitlements/Design Review – If you are going to design a project with certain uses then you may need an “Entitlement” process to determine of that is possible.  Examples of uses that always require an entitlement or special use permit are: churches, liquor stores, auto repair, bars and others.  This process typically involves public hearings and presentations.  If your use is already entitled in the location that you want then your project may require a “Design Review.”  The design review uses the preliminary design drawings to get government agency approvals for what you want. You can find more information on this specific topic on YouTube. https://www.youtube.com/watch?v=wwtfxrsC12g   Submit and Process for Governments Entitlements Process – Once you have a reviewed design and your preliminary entitlement information, you must submit certain drawings to the corresponding government agency so that they may approve and the architect can finalize them. This can often be a lengthy process as your project must be coordinated between different government agencies and departments. You can find more information on this specific topic on YouTube. https://www.youtube.com/watch?v=_3ktF5MuhQE   Soils Report – Soils reports are generally created by geotechnical engineers.  Knowing what type of land and soils conditions your new building will be on is important. Can be very beneficial to know this is advance of purchasing land.  Some soils conditions can dramatically increase foundation and structural costs. You may also find ground water that may or may not complicate the project further. A soils report will be necessary when it comes time for structural engineering.  If you have not yet purchased the land the seller may have an existing soils report which you can have for free.  You can find more information on this specific topic on YouTube. https://www.youtube.com/watch?v=VKJ02pyOvCM   Cost Estimation – Having a formal preliminary cost estimate made to determine your likely building costs will help to establish if your planned building will be within your budget. Keeping in mind that the estimate would not be a 100% accurate one as you have merely given the estimator a preliminary design to estimate from. There will be more details known and determined there may or may not be changes throughout the actual final design and drafting phases but you will at least have a general sense of how much this new building will cost. You can find more information on this specific topic on YouTube. https://www.youtube.com/watch?v=RYBcqn1723Q   Completing any or all of the items above will help to make the drafting process for SSA Architecture or any other Las Vegas architects an easier and often shorter process. Check out the full video on this topic on YouTube. https://www.youtube.com/watch?v=wVQF9lutkxc&list=PLGcR_hF4Ue6203JXii5NiKj9FP7k00sDv&index=8&t=592s

Recently health has become a major concern in the world of architecture and more specifically medical oriented architecture as it has rapidly become more important to prevent the spread of virus, germs, and diseases. There are many things that can be done to your residential or commercial building design that can improve the overall health of the people using the spaces. This blog by SSA – Las Vegas Architects will cover information pertaining to lighting, indoor air quality, air conditioning, and other general building conditions.   Lighting-Sunlight is good for people, UVC light kills germs and viruses. Modern buildings have been using windows and skylights that block UV light because it can bleach textiles found within the building. It may be beneficial to remove the UV filter on a skylight or the windows that shine on a majority of a room as it would help to sterilize the room’s air. Alternatively UVC light bulbs can be purchased to help clean the air without the need for direct sunlight. UVC light is not the only countermeasure to preventing the spread of germs, though it is useful for killing germs.   Air Conditioning-A common air conditioning system found in Las Vegas commercial buildings is a mixed air system. Generally air is blown from the ceiling then allowed to swirl around the room it is then returned back to the AC unit through a return on the ceiling (as shown below). The advantages of this system are that it is cheap and every HVAC tech knows how to install and repair it. However since the air is swirling throughout the room, it is very easy for pollutants and microorganisms to travel from person to person in the room. One solution for this issue is to use a different air conditioning system like displacement air conditioning. This system pumps air into the room from the bottom but still returns the air through the ceiling (as shown below). Meaning that any particles in the air are taken up to the return sooner rather than being allowed to swirl around the room first. Germs and other particles are removed from the vicinity of people much quicker, significantly decreasing the likelihood of inhaling harmful pollutants. The displacement ventilation system is statistically better than the mixed air system. It can also be beneficial to combine with the practice of utilizing UV lighting to clean air. Installing a UVC light on the return duct of your AC unit will help to kill germs, viruses, and pollen so that they do not get recirculated to harm people.   It has become widely known that mold is bad and it is definitely in your best interest to remove any and all mold within your building. Fresh air is also important, as architects in Las Vegas we have found that building owners will commonly close their fresh air vent on their building during the summer months. They do this to assist their AC units in cooling during the heat wave days. That may be satisfactory during that period of the year, except it is common that the owners do not reopen the fresh air vent when the moderate heat months arrive. A proper fix for this problem would be to install an air to air heat exchanger that does the work of blocking heat from fresh air. Fresh air design best practices would include intake of only the air appropriate for the people and activities in the building. Automated air sensors and controls are available. Where construction costs or other factors prohibit using automated systems or opening and closing of ventilation, building occupants can set up procedures to improve indoor air quality without construction costs. If the air to air heat exchanger or open fresh air vent aren’t enough for your building, it could be helpful to open a window or door to let extra fresh air in to the building.   These are only a few tips to help create a healthy environment. Before constructing anything we recommend hiring a licensed architect or engineer to design your system properly. SSA architecture is always happy to provide you with more information, you can reach us at 702-873-1718. Here at SSA Architecture your first commercial project consultation at our Las Vegas Office is always free. More information on this topic is provided in the corresponding video found on our YouTube channel here. A healthy environment is important in any building, particularly those in the healthcare field. You can find information on our other work as medical architects in Las Vegas here.

SSA Architecture has worked as an architectural firm in Las Vegas for over 20 years and in that time SSA has done a multitude of projects including built from the ground up and building remodeling design projects. It is common place for us to take an as built site plan and draw a sketch of the proposed new building as a starting point. It is also commonplace for SSA Architecture to use public information on a vacant site to design an entirely new building and site plan.   From there we can begin to analyze if the property owner’s desired concept ‘plans’ will be in compliance with current rules. For example it is pertinent to determine whether or not the building will be too tall, if the lot size will be able to provide an adequate amount of parking spaces, and if the parcel is zoned for the correct use. These rules vary by project location and form of the building work depending on the final use of the building and the jurisdiction the land is in. The various government rules can be further specified by exceptions found in certain areas within the designated jurisdictions. For example, downtown may have parking requirement exceptions that the suburban areas may not have. The plans will have a better chance of being approved right away if the original drawings comply with the rules while still covering all of the client’s needs. And approvals can be possible for projects that are not in compliance with the rules. Regardless of what architect or lawyer processes your entitlements requests, there is never a guarantee that the reviewers will not object to the building concept or design of the “Plans”.   Sometimes it’s not possible for the project to comply with the rules. A common example of this would be when an old rule gets changed that makes a previously existing built item no longer compliant with the current rules. This can result in clients deciding to submit construction projects that are not 100% code compliant or 100% in compliance with current planning and zoning requirements. This can be approved but there is a need for additional steps to be taken. In some cases an attorney specializing in use approvals may be able to help with negotiations for approvals. In any event approval of land use, zoning and design reviews out of compliance are political.   The steps in the process of approvals are typically:1. Create a drawing that shows what the client wants.2. Visit the governing authority(s) staff to discuss the proposal.3. Draw formal drawings for submission.4. Meet with planning and zoning staff to discuss the formal submission.5. A formal submission drawing set for (either) design review, planning, zoning or use approval submission.6. Once submitted the plan set will likely be initially rejected or returned with (staff objections) comments.7. At this point the client can decide to stay with the original submission over staff objections, adjust the design, cancel the project or attempt to make a compromise with the government staff.8. A final submittal can be re-drafted according to the client’s decisions.9. There will then typically be public hearings, discussions and more reviews by staff before the entitlement is established.10. Many planning and zoning cases result in a (NFA) Notice of final action. The NFA provides a notice of what was agreed in a written form.   Out of compliance projects always take longer in the review system often times taking an additional month minimum.So how much will this cost? With SSA Architecture it always starts with a free consultation followed with a fee quotation for the original drawing submission for the due diligence process. After the pre-submission meeting the list of items that your applicable agency requires for your project will become known. For design review processes, fixed fee quotations are available. For zoning cases, fixed fees for drawings are available. For meetings related to use approvals and zoning cases we are unaware of any provider that does this work for other than hourly rates. Our hourly rates are competitive. When a client’s vision for a property is not in compliance with rules, it can and will result in a huge time and money expenditure. That does not mean that the project is not worth it. It simply means that more time and materials will have to go into bringing it to fruition.   The explanation above does not include building permit approvals, which are a separate process.   If you have any more questions or have a project fitting this criteria feel free to call and schedule a free consultation at 702-873-1718. If you were looking for more information on this topic, you can check out a FAQ YouTube video on this topic here.